Transfer concentrate

Transfer concentrate

The transfer concentrate (30 ml content) is diluted with 0.5 l water. Ideally, use a spray bottle for this. With this mixing ratio, you achieve a good compromise between ease of installation and drying time of the film.

If you use less than 0.5 l of water, the film is easier to move on the glass. However, this can cause the film to shift when you press it on with the squeegee. If you use more water, the film sticks to the glass almost immediately and makes it difficult to align it precisely. With this wet application, you achieve a bubble- and wrinkle-free installation.

Our specified mixing ratio is sufficient for approx. 6 to 7 m² of surface to be covered.

We strongly advise against the use of water diluted with washing-up liquid. This can lead to streaking due to a reaction with the film adhesive.

As an alternative to our transfer concentrate, you can also use a neutral cleaner. Just make sure that it is pH-neutral so that no streaks form under the film as with conventional washing-up liquid.