Tile sticker in wood look dark wenge custom-fit size

Rounded corners

Width [cm]

Height [cm]

To measure your tile!

Cutting possible on request
Unfortunately, your desired size cannot be ordered via the online shop. However, we can still offer you the dimensions. Please ask our customer service at info@velken.shop.

from €0.90 / piece

Price per m²: €29.16 Price per m²: €21.87 incl. VAT plus shipping costs. Item no. 911101

Order accessories directly

Mounting squeegee with felt edge

€4.95

Surface & Glass Cleaner 500 ml

€6.95

Professional safety ruler, aluminium, 55 cm length

€32.90

Professional cutter knife

€5.95

Microfibre universal cloth

€1.95

Quantity	Unit price
to 24	€0.90
from 25	€0.76
from 50	€0.63
from 100	€0.49
from 251	€0.45

Delivery time approx. 5-7 Days

CNC cutting accurate to the millimetre

free assembly tool

Properties of this film

Liability	self-adhesive
Mounting side	Indoor assembly
Material thickness	approx. 230 µm
Durability	10 years (indoor installation)
Colour	dark brown
Grain	fine
Application	Floor tiles, Wall tiles
Temperature resistant	-20°C to +110°C

Questionst?
Start WhatsApp chat

[OS_SUBTMPL:article/description_tile_foils_wood-look.html]

Close menu

Let them shine in new splendour!

It's child's play to cover your old, boring bathroom or kitchen tiles with our tile foils in many different decors and colours, perfectly tailored to your size.

The tile foils are primarily intended for the embellishment of wall tiles. Floor tiles can also be embellished to a certain extent, but you should bear in mind that the mechanical stress on the foil, e.g. from walking on it with shoes, can lead to damage to the foil surface.

Furthermore, our tile foils are completely insensitive to moisture. In short, a unique, innovative product that allows you unlimited creativity at low cost.

Advantages of tile foils

Cost-efficient: Save a lot of money compared to traditional renovation.
3D deformable: Strongly rounded tile edges can be easily pressed on with a hairdryer.
Durable: 10-year guarantee against delamination, cracks, yellowing and other changes in appearance.
Hygienic: Quick and easy to clean, prevents mould and staining.

Tested for safety

Tested A+ for VOC emissions (volatile organic compounds).
Fire resistance rating according to Euroclass B S2 D0 for use in public areas

Important ordering information

The decor of this tile foil runs in the longitudinal direction, i.e. from top to bottom (vertically). Therefore, when entering the dimensions, please ensure that the width and height are not reversed, as otherwise the decor will be rotated by 90°! Please compare the following sketch:

Available downloads

Datenblatt Fliesenfolie in Holzoptik

Technical data and information at a glance...

Close menu

Manufacturer's guarantee

The manufacturer provides a 10-year guarantee on this tile foil for interior installation. This warranty covers delamination, cracks, yellowing and other changes in appearance. The durability of the tile film for interior installation is up to 15 years in Central Europe, depending on various factors.

The film has excellent abrasion resistance against acid (ethanol, salt), stains, dirt and mould, except xylene.

Technical overview
Specifications	Calendered PVC film with polymer adhesive coating
Thickness	200 to 350 microns
Max. roll width	122,0 cm
Tear strength	Width: 5.1 kg / cm Length: 6.9 kg / cm
Elongation	up to 220
Elongation (after 48 hours at 65 °C)	Width: 0.9 % Length: 0.6 %
Tensile strength	Width: 262 kg / cm Length: 230 kg / cm
Adhesive	Acrylic and active, insensitive to moisture
Adhesive strength	20 min after installation: 1.04 kg / cm 24 h after installation: 1.43 kg / cm 3 days after installation: 1.51 kg /cm 7 days after installation: 1.65 kg /cm
Adhesive strength (max. 70 °C)	After 1 day: 1.37 kg / cm After 7 days: 1.03 kg / cm
Ideal installation temperature	20 °C to 25 °C (min. 12 °C and max. 35 °C)
Installation instructions	Dry bonding with a suitable squeegee. Shape bonding possible using a hot air gun.

How to mount this film on the window...

Close menu

Montagevideo starten — Installation video for window films. Click on the picture to start.

Assembly instructions for Tile foils (self-adhesive)

You will need the following items

Plastic bottle with hand sprayer, adhesive tape, paper towels (not included)
Transfer concentrate (not included)
Glass cleaner (not included) or commercially available glass cleaner
Installation squeegee and glass scraper blade (included free of charge in the delivery).

Installation tips

Two people should carry out the installation!
Do not install any film at temperatures on the installation side below +6° C.

Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
Thoroughly clean the glass with commercial or our glass cleaner!
Remove all sticky particles (e.g. paint or fly dirt) preferably with the glass scraper blade. No dirt residues should remain on the glass!
The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
Now hold the in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
Now let the dry for three days without touching it.
Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

FAQ`s about the installation

Films that are no larger than 1m² can be installed alone without any problems.
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.

Order a product sample...

Close menu

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.