Sandblasting film for stone, natural stone, metal & glass

Geometry A4 cut Linear metre

Width [cm]

Height [cm]

To measure your window!

Cutting possible on request
Unfortunately, your desired size cannot be ordered via the online shop. However, we can still offer you the dimensions. Please ask our customer service at info@velken.shop.

from €1.00

Price per m² from: €27.74 Price per m²: €24.97 Price per m²: €27.74 incl. VAT plus shipping costs. Item no. 713310

Delivery time approx. 5-7 Days

CNC cutting accurate to the millimetre

free assembly tool

Properties of this film

Application	Glass, Stone
Property	opaque
Colour	green, grey
Liability	self-adhesive

Questionst?
Start WhatsApp chat

This self-adhesive stencil film is ideal for sandblasting work on smooth surfaces such as...

Close menu

This self-adhesive stencil film is ideal for sandblasting work on smooth surfaces such as glass or polished stone. Furthermore, this film is also suitable for natural stone and metal. The high adhesive strength of the removable adhesive ensures a safe surface finish. The sandblasting film is suitable for a very high load level and enables the creation of sharp contours.

Due to the high flexibility of the film, we use it for the production of our stencil films for glass decorations.

Included in delivery

You should definitely order the transfer concentrate, art. no. 020010 additionally. It makes the installation easier and leads to a better result. Alternatively, you can also use a pH-neutral cleaner. This must be pH-neutral to prevent streaks from forming together with the film adhesive!

Any offcuts are not included in the scope of delivery.

Technical data and information at a glance...

Close menu

Technical data
Material	Special PVC
Film thickness	approx. 330 µm
Adhesive	Polyacrylate adhesive
Adhesive strength (immediate)	approx. 3.8 N/25 mm
Dimensional stability	0 %
Temperature range	-30° C to + 80° C

Answers to the most frequently asked questions...

Close menu

General questions

Of course, please click on this link to access the corresponding order form. You are welcome to add to the list of items if you wish. There are no costs for you!

We cut each film to the exact millimetre according to the dimensions you enter. The cutting is free of charge. You can find detailed instructions on how to measure your panes here.

Alternatively, you can also cut your film by hand with a cutter knife. However, this requires a little manual skill, so you are usually better off using our free service.

In general, almost all 2D shapes can be produced. Many geometries (e.g. triangles, trapezoids, circles) can be ordered directly via the online shop. To do so, please click on the orange rectangle to the right of the article image. You can then choose between many different shapes.

For shapes that are not specified, please send us a small sketch (photo) in which you specify the side lengths, radii or angles. Please contact us for this purpose.

The window film adheres to all surfaces that are approximately as smooth as glass. When applying the film to plastic, please bear in mind that the adhesive may bond with the plastic, making it impossible to remove the film cleanly later.

You can keep your window pane clean as usual. The film should not be rubbed with sharp-edged objects (e.g. a brush).
You can find more information in our guide General care instructions for window films.

All window films can be removed without leaving any residue and without damaging the glass surface!
Below you will find detailed instructions on how to remove old window films.

Unfortunately, we do not currently offer foil printing and do not have any partner companies with whom we can realise foil printing.

How to mount this film on the window...

Close menu

Montagevideo starten — Installation video for window films. Click on the picture to start.

Assembly instructions for sandblast films (self-adhesive)

You will need the following items

Plastic bottle with hand sprayer, adhesive tape, paper towels (not included)
Transfer concentrate (not included)
Glass cleaner (not included) or commercially available glass cleaner
Installation squeegee and glass scraper blade (included free of charge in the delivery).

Installation tips

Two people should carry out the installation!
Do not install any film at temperatures on the installation side below +15° C.

Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
Thoroughly clean the glass with commercial or our glass cleaner!
Remove all sticky particles (e.g. paint or fly dirt) preferably with the glass scraper blade. No dirt residues should remain on the glass!
The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
Now hold the Sandblast foil in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the Sandblast foil that is now exposed with the liquid.
Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
Place the Sandblast foil on the glass, the film should slide back and forth well, otherwise spray the glass again.
Now spray the other side of the Sandblast foil as well, this will make it easier for you to work with the mounting squeegee.
Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
Now let the Sandblast foil dry for three days without touching it.
Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

FAQ`s about the installation

Films that are no larger than 1m² can be installed alone without any problems.
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

In addition, do not lay the Sandblast foil after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the Sandblast foil, which is something to avoid.

Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.

Order a product sample...

Close menu

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.