Neutral silicone, transparent, 310 ml

Neutral silicone, transparent, 310 ml

You can use this transparent neutral silicone to seal the edges of your externally mounted window films on window surfaces. This prevents the film edge from peeling off the window pane and increases the durability of the film. With this silicone, the window film is not damaged thanks to the neutral cross-linked structure.

We recommend its use especially for slanted glazing (e.g. skylights), where rainwater can collect more easily at the lower window edge. Without edge sealing, this rainwater can be sucked upwards through the capillary effect under the film and weaken the film adhesive. The service life of an externally applied film can therefore be reduced without edge sealing.

Our experience shows that one cartridge of this neutral silicone is sufficient for approx. 20 running metres of edge sealing.

Product features

• Good adhesion to all construction-related substrates
• Good material compatibility: Does not cause corrosion on metals
• Good resistance: resistant to ageing, weathering and UV radiation
• Permanently elastic
• Compatible with paints

Properties

• Lightfast
• Acid-free
• Odourless
• Fungicidal finish possible
• Not subject to labelling

Notes

• Neutral silicone is not suitable for bonding or filling cavities.
• Corresponds to building material class B2 according to DIN 4102
• Due to the large number of existing paint and stain formulations, especially on alkyd resin paints and powder-coated aluminium, it is necessary to carry out your own tests to check the suitability.
• Danger of yellowing on contact with white alkyd resin paints cannot be ruled out.
• Neutral silicone emits a typical silicone odour in the cross-linked state, which is no longer perceptible after complete curing.