Order Glass Decoration & Window Decoration in Pearl Necklace Design

Glass decoration for windows, pearl necklace

Width [cm]

Height [cm]

To measure your window!

Cutting possible on request
Unfortunately, your desired size cannot be ordered via the online shop. However, we can still offer you the dimensions. Please ask our customer service at info@velken.shop.

from €39.90

Minimum price: €39.90 Price per m² from: €46.48 Price per m²: €46.48 Price per m²: €46.48 incl. VAT plus shipping costs. Item no. 235-213080

Order accessories directly

Mounting set

€8.95

Assembly set professional

€14.95

Transfer concentrate

€3.49

Delivery time approx. 4-6 Days

CNC cutting accurate to the millimetre

free assembly tool

Properties of this film

Liability	self-adhesive
Design	Waves
Durability	10 years (indoor installation)
Application	Windows

Questionst?
Start WhatsApp chat

Glass decoration film with pearl necklace...

Close menu

Glass decoration film with pearl necklace

This self-adhesivedecorative glass film has the same white colour tone as an etched or sandblasted glass pane. The view through is made more difficult, whereby almost 90% of the light passes through. Our self-adhesive decorative film is contour-cut, without a transparent border or background. Where the motif/text is cut out negatively, the glass surface remains visible. We manufacture our glass decor films in frosted glass look to the exact size you require (max. 122 x 300 cm/300 x 122 cm).

Please note that the colour reproduction of the item images can only serve as a non-binding orientation. We recommend that you check the colour shades in real life by means of free samples before purchasing.

A total of 5 colours are available for the glass decoration film

satinato white (213080)
satinato cream (213085)
satinato rosé (213090)
satinato bleu (213095)
satinato mint (213100)

These premium films offer many advantages over etched glass panels

The films are non-sensitive to touch, considerably cheaper and the decor can be removed from the glass without damage.
The silk-matt surface with metallic pigments makes these glass decoration films look very classy.
They do not shrink and do not wrinkle even after years.
The scratch-resistant surface of the glass decoration films makes them easy to clean with standard glass cleaners.

For your understanding

The white or coloured areas shown in the picture above represent the film-covered glass. The transparent surfaces remain unadhered.

Note on production
We adjust the aspect ratio of the motifs proportionally and undistorted to your ordered dimensions. Depending on the desired dimensions, this may result in a fully filled film area towards the edges.

Included in delivery

You should definitely order the transfer concentrate, art. no. 020010 additionally. It makes the installation easier and leads to a better result. Alternatively, you can also use a pH-neutral cleaner. This must be pH-neutral to prevent streaks from forming together with the film adhesive!

Any offcuts are not included in the scope of delivery.

Technical data and information at a glance...

Close menu

Manufacturer's guarantee

The manufacturer of the glass decoration films grants a durability guarantee of 7 years on these premium films when installed vertically outdoors. However, due to their partly very filigree structures, these glass decoration films should not be used outdoors under any circumstances. Indoors, these films therefore have a considerably longer shelf life.

The bonded film is resistant to most petroleum-based oils, greases, solvents, mild acids and alkalis.

Technical data
Material	PVC (polymer plasticised)
Film thickness	approx. 80 µm
Adhesive	Polyacrylate adhesive
Adhesive strength (ASTMD-903)	approx. 10 N/25 mm
Dimensional stability	maximum -0.45
Light transmission (DIN 53 147)	approx. 66.5
Temperature range	-30° C to + 80° C

Installation recommendation

Type of glass	Number of panes	mainly installed	U-value W/(m²K)	Inside- installation	Exterior installation
single glazing	1 (-fold)	until 1978	5,7 - 5,8	yes	yes
insulating glazing	2 (-fold) 2 (-fold) 3 (-fold)	1978 - 1994 1995 - Today 1978 - 1994	3.0 - 3.4 1.2 - 2.5 2.1 - 2.4	yes yes yes	yes yes yes
insulating glazing	2 (-fold) 3 (-fold)	1978 - 1994 1995 - Today	1.7 - 2.1 0.4 - 1.4	yes yes	yes yes
sunlight glazing	2 (-times) 2 (-times) 3 (-times)	1978 - 1994 1995 - Today 1995 - Today	1.4 - 2.0 1.0 - 2.5 0.5 - 1.3	yes yes yes	yes yes yes

These recommendations may still result in glass breakage due to various factors at the installation site. According to our AGB, §10 paragraph 3 we do not accept any liability for this.

Answers to the most frequently asked questions...

Close menu

General questions

Of course, please click on this link to access the corresponding order form. You are welcome to add to the list of items if you wish. There are no costs for you!

We cut each film to the exact millimetre according to the dimensions you enter. The cutting is free of charge. You can find detailed instructions on how to measure your panes here.

Alternatively, you can also cut your film by hand with a cutter knife. However, this requires a little manual skill, so you are usually better off using our free service.

In general, almost all 2D shapes can be produced. Many geometries (e.g. triangles, trapezoids, circles) can be ordered directly via the online shop. To do so, please click on the orange rectangle to the right of the article image. You can then choose between many different shapes.

For shapes that are not specified, please send us a small sketch (photo) in which you specify the side lengths, radii or angles. Please contact us for this purpose.

The window film adheres to all surfaces that are approximately as smooth as glass. When applying the film to plastic, please bear in mind that the adhesive may bond with the plastic, making it impossible to remove the film cleanly later.

You can keep your window pane clean as usual. The film should not be rubbed with sharp-edged objects (e.g. a brush).
You can find more information in our guide General care instructions for window films.

All window films can be removed without leaving any residue and without damaging the glass surface!
Below you will find detailed instructions on how to remove old window films.

Unfortunately, we do not currently offer foil printing and do not have any partner companies with whom we can realise foil printing.

How to mount this film on the window...

Close menu

Assembly instructions for glass decoration foils (self-adhesive)

You will need the following items

Plastic bottle with hand sprayer, adhesive tape, paper towels (not included)
Transfer concentrate (not included)
Glass cleaner (not included) or commercially available glass cleaner
Installation squeegee and glass scraper blade (included free of charge in the delivery).

Installation tips

Two people should carry out the installation!
Do not install any film at temperatures on the installation side below +6° C.

Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
Thoroughly clean the glass with commercial or our glass cleaner!
Remove all sticky particles (e.g. paint or fly dirt) preferably with the glass scraper blade. No dirt residues should remain on the glass!
The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
Now hold the Glass decoration foil in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the Glass decoration foil that is now exposed with the liquid.
Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
Place the Glass decoration foil on the glass, the film should slide back and forth well, otherwise spray the glass again.
Now spray the other side of the Glass decoration foil as well, this will make it easier for you to work with the mounting squeegee.
Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
Now let the Glass decoration foil dry for three days without touching it.
Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

FAQ`s about the installation

Films that are no larger than 1m² can be installed alone without any problems.
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

In addition, do not lay the Glass decoration foil after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the Glass decoration foil, which is something to avoid.

Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.

Order a product sample...

Close menu

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.

1. select sample (max. 5 pieces)
Please add at least one colour! Explanation: For glass decors, we cannot send you the finished decor as a miniature sample, but only the desired shade from which your glass decor will later be made.

2. Specify shipping address

Specify company

Company (optional)

First and last name

Street and no.

Flat, floor, etc. (optional)

Postcode

Location

Germany

E-Mail

Yes, I would like to be informed about news by newsletter.

Here you can find our privacy policy.

Thank you very much!
We have received your foil requests.
The samples are usually sent to you within one working day.

Expert adviser Thomas de Jong - Customer support

» Open questions about one of our articles? I'll be happy to answer them for you! «

Compare articles

Design

Topic

Carrier material

Mounting side

Durability

Colour

UV protection - percent

Glass decoration for windows, pearl necklace

from €39.90

Waves

Modern

Paper

Indoor assembly

10 years (indoor installation)

Bordüre für Glasflächen unterschiedliche Kreise weiß matt

Border for glass surfaces, different circles

10 years (indoor installation)

Privacy film, sandblasted design white matt

from €1.00

without

Paper

Indoor assembly, Outdoor installation

10 years (indoor installation)

white

Glass decoration for windows, percent sign

10 years (indoor installation)

Glass decor for windows, gentle waves

10 years (indoor installation)

Glass decoration for windows, crossed waves

10 years (indoor installation)

Glass decoration for windows, dots

10 years (indoor installation)

Glasdekor Sonne im Kreisdesign weiß matt

Glass decoration for windows, sun in circle design

10 years (indoor installation)

Glass decoration for windows, brick wall

10 years (indoor installation)

Glass decor for windows, modern structure

10 years (indoor installation)

Glass decoration for windows, squares

10 years (indoor installation)

Glass decor for doors, Asteroids

10 years (indoor installation)

Glass decoration for windows, stalagmites

10 years (indoor installation)

Assembly instructions

Tool for easy assembly

The tool sets and accessories offered by Velken will be very useful for the success of your installation! Adhesive films, electrostatic films, decorative coatings... for each product there is the appropriate tool.

In addition to the assembly video, take a look at the detailed assembly instructions.

- 25 %

Description

This assembly set is ideal for medium-sized film installations of 5-10 m². With this bundle you save almost 23% compared to the individual components.

040020 - Assembly set professional

€20.20 €14.95