Blackboard film, tray
- self-adhesive
- Indoor assembly
-
Choose wall colour
Choose living space
-
-
Example
-
Room simulator
Minimum price: €14.90 Price per m² from: €26.90 Price per m²: €26.90 Price per m²: €26.90 incl. VAT plus shipping costs. Item no. 119-453020
Delivery time approx. 4-6 Days
CNC cutting accurate to the millimetre
free assembly tool
Application | Glass, Wall, Plastic, Wood |
Design | Motifs |
Liability | self-adhesive |
Start WhatsApp chat
Decorative foil with motif to write on
Embellish your home with this appealing design. Depending on the foil type, the foil is writable and/or magnetic.
- Size can be infinitely varied
- easy to rewrite
- Dirt-repellent and easy to clean
- easy to clean with standard cleaning agents
- no shrinkage, no wrinkles
- 4 film types to choose from
Choose your film type
All films are self-adhesive and can be easily applied to almost all smooth surfaces and removed again if desired.
-
Chalkboard film
This self-adhesive black chalkboard film is ideal for daily changing chalkboard inscriptions. Restaurants and bars appreciate this for their daily menus, for example.Of course, this film will also quickly find many friends in the children's room at home. It is always possible to wipe the blackboard film with a damp cloth and then rewrite it.
-
Whiteboard film, white
With this whiteboard film, you can turn any smooth surface into a whiteboard that can be written on with dry-erase markers in no time at all. The inscription can be wiped dry with any felt-tip pen even after several months. This wipeability is achieved by a high-gloss white lacquer coating on the PVC surface.
-
Magnetic whiteboard film, white
This film is like the white whiteboard film
described above with the extra feature that magnets also adhere to it. Our magnets included in the accessories can hold approx. 8 pages of DIN A4 paper with one magnet. -
Magnetic iron foil, black
This self-adhesive iron foil is perfect for attaching notes or thin objects to it with the help of magnets. Thanks to the self-adhesive back, it turns any smooth surface into a magnetic surface.
Chalkboard foil, black
Manufacturer's guarantee
The manufacturer grants a guarantee of 2 years on this chalkboard film when mounted vertically outdoors. Indoors, the durability is significantly higher.
The bonded film can be written on with commercially available chalk. Liquid chalk pens containing solvents are not suitable, as they can leave behind "ghost writing".
Due to the risk of glass breakage, this board film should not be applied to windows or glass doors that are exposed to the sun.
Technical data | |
---|---|
Material | PVC |
Film thickness | approx. 160 µm |
Adhesive | Polyacrylate adhesive |
Adhesive strength (ASTMD-903) | approx. 12.5 N/25 mm |
Dimensional stability | slight shrinkage |
Temperature range | -30° C to + 80° C |
Whiteboard film, white
Manufacturer's guarantee
The manufacturer grants a durability guarantee of 5 years on this whiteboard film for indoor use.
Technical data | |
---|---|
Material | Polymer PVC film |
Film thickness | approx. 100 µm |
Adhesive | Solvent-based acrylic adhesive |
Adhesive strength | 18 N/25 mm |
Dimensional stability | < 0,8 |
Temperature range | +5° C to + 40° C |
Magnetic whiteboard foil, white
Manufacturer's guarantee
The manufacturer grants a 5-year durability guarantee on this magnetic whiteboard film when mounted vertically indoors. In an immersion test over 24 hours, a bonded film is resistant to most petroleum-based oils, greases, solvents, mild acids and alkalis.
Due to the risk of glass breakage, this magnetic iron film should not be applied to windows or glass doors that are exposed to the sun.
Technical data | |
---|---|
Material | Polyethylene-based ferrous film with PP laminate |
Film thickness | approx. 550 µm |
Adhesive | Polyacrylate adhesive |
Adhesive strength | 7-12 N/25 mm |
Dimensional stability | maximum -1.50 |
Temperature range | -30° C to + 80° C |
Magnetic iron foil, black
Manufacturer's guarantee
The manufacturer provides a 5 year durability guarantee on this magnetic iron film when mounted vertically indoors. When immersion tested for 24 hours, a bonded film is resistant to most petroleum-based oils, greases, solvents, mild acids and alkalis.
Due to the risk of glass breakage, this magnetic iron film should not be applied to windows or glass doors that are exposed to the sun.
Technical data | |
---|---|
Material | polyethylene-based ferrous film |
Film thickness | approx. 400 µm |
Adhesive | Polyacrylate adhesive |
Adhesive strength | 7-12 N/25 mm |
Dimensional stability | maximum -1.50 |
Temperature range | -30° C to + 80° C |
Mounting on smooth surfaces such as glass, wood, metal
You will need the following items
- Plastic bottle with hand sprayer, adhesive tape, paper towels (not included in delivery)
- Transfer concentrate (not included )
- Glass cleaner (not included ) or commercially available glass cleaner
- Commercially available cleaner for cleaning the substrate (not included in the scope of delivery)
- Installation squeegee and glass scraper blade (included free of charge in the delivery)
Installation tips
- Depending on the size of the film, two people should carry out the installation!
- Do not install the film if the temperature on the installation side is below +6° C.
Step by step instructions
- Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (sufficient for an area of approx. 6 to 7 m²).
- Thoroughly clean the surface with commercially available surface cleaner or, in the case of glass, our glass cleaner!
Remove all sticky particles (e.g. paint or fly droppings) preferably with the glass scraper blade (only on glass). No dirt residue should remain on the surface! - The board film with motif consists of 3 films, the solid opaque backing paper, the actual board film with motif and the somewhat transparent transfer paper to facilitate installation.
Now place the board foil with the view side down on a table or similar. You are now looking at the back of the film. Now rub the squeegee vigorously over the entire reverse side. All 3 parts of the film will be firmly bonded together. - Then take the board film and align it on the target surface. Use the motif as a guide, not the transfer film!
Once you have found the position, carefully mark the corners of the transfer paper on the surface with a pencil. - Place the board foil back on the table. Carefully and slowly pull off the solid backing paper at as flat an angle as possible. The board foil motif will stick to the transfer paper.
If this is not the case, it is sufficient to lift the board foil slightly from the backing paper with a knife. - Now first spray the adhesive side of the board foil and then the surface to which the board foil is to be applied with the liquid. Do not be sparing with the liquid, the foil and surface should be well wet.
- Now hold the remaining board film, with the transfer paper still in place, very tightly and place it against the marks on the surface.
Then press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. Wrap the supplied squeegee with a paper towel to avoid scratches. - Now wait a few hours, or better still 1 to 2 days. Then pull the transfer paper off the surface carefully and slowly, starting from one side at a flat angle.
The board film motif will now remain on the surface. If this is not the case, wait a little longer and rework with the squeegee. - After peeling off the transfer paper, check the board foil for any non-adhesive corners and carefully press them on with the squeegee.
Mounting on rough wall surfaces such as plaster, paint or wallpaper
You will need the following items
- Adhesive tape (not included in delivery)
- Cleaning supplies (not included in delivery)
- Clean tea towel (not included in delivery)
- Assembly squeegee and glass scraper blade (included free of charge in the delivery)
Installation tips
- Depending on the size of the film, two people should carry out the installation!
- Do not install the film if the temperature on the installation side is below +6° C.
Step by step instructions
- Clean the wall surface thoroughly with a dry cloth or feather duster.
- The board film with motif consists of 3 films, the solid opaque backing paper, the actual board film with motif and, to make mounting easier, the slightly transparent transfer paper.
Now place the board foil with the view side down on a table or similar. You are now looking at the back of the film. Now rub the squeegee vigorously over the entire reverse side. All 3 parts of the film will be firmly bonded together. - Then take the board film and align it on the wall surface. Use the motif as a guide, not the transfer foil!
Once you have found the position, carefully mark the corners of the transfer paper on the wall with a pencil. - Then place the board foil back on the table. Carefully and slowly pull off the solid backing paper at as flat an angle as possible. The board foil motif will stick to the transfer paper. If this is not the case, it is sufficient to lift the board foil slightly from the backing paper with a knife.
- The board film with the transfer foil must not fold up now, i.e. the adhesive sides must not come together. This would render the film unusable and it would be lost.
- Now, ideally with the help of two people, hold the remaining panel film with the remaining transfer paper very tightly and place it against the marks on the wall surface.
Form the tea towel into a ball and use it to press the board foil against the wall, starting from the centre and working outwards on all sides.
Alternatively, you can use the squeegee to press the board foil evenly from the centre to the right and left. When doing so, wrap the supplied squeegee with a paper towel to prevent scratches. - Now carefully and slowly peel off the transfer paper from the board film with motif, starting from one side and working at a flat angle.
The board foil motif will now remain on the wall. If this is not the case, please press down a little with your finger.
We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.
1. select sample (max. 5 pieces)
|
||
Please add at least one foil type!
Explanation: In the case of board foils with motifs, we cannot send you the finished motif as a miniature sample but only the desired basic foil from which your board foil will later be made. |
||
- Germany
- Austria
- Switzerland
- Belgium
- Denmark
- France
- Gibraltar
- Greece
- Ireland
- Italy
- Liechtenstein
- Luxembourg
- Malta
- Monaco
- Netherlands
- Norway
- Poland
- Portugal
- Sweden
- Slovakia
- Slovenia
- Spain
- Czech Republic
- United Kingdom
- United States of America
We have received your foil requests.
The samples are usually sent to you within one working day.
Film specialist, Dirk Bilstein - Application engineer
" I will be happy to give you expert advice on choosing the right film! "
Rate this item objectively and share your buying experience with other visitors.
As a thank you, we will reward you with a shopping voucher* of up to 10€ for your next purchase.
*Voucher valid for 1 year, redeemable from 30€ value of goods (5€ voucher) or 50€ value of goods (10€ voucher), max. 1 voucher per order, not combinable.
The voucher will then be sent to you by email.
You will receive an email from us after the rating has been activated in which you will find the shopping voucher.
New reviews are activated by us every working day.
The company Velken-Folientechnik GmbH accepts this assignment and ensures the necessary data protection.