Adhesive residue remover for glass, metal or cars

€6.95

Price per litre: €13.90
incl. VAT plus shipping costs. Item no. 020065

Order accessories directly

Glass scraper with retractable blade

€3.95

Glass scraper for sensitive surfaces

€3.95

Professional glass scraper, 15 cm wide

€19.90

Microfibre universal cloth

€1.95

Delivery time approx. 4-7 days

Questionst?
Start WhatsApp chat

Areas of application for the adhesive remover Anyone who has ever taken on this task knows the...

Close menu

Areas of application for the adhesive remover

Anyone who has ever taken on this task knows the difficulties that can arise when removing old window or sun protection films. The problem is not the film itself, but the adhesive. As a general rule, it is not advisable to use aggressive solvents, as there are too many disadvantages associated with this, e.g. harmful vapours, damage to frames or window sills, etc.

To soften the adhesive, thisadhesive residue remover is ideally suited, with which you can easily remove the adhesive remaining on the pane after removing a window film. It leaves very minimal traces on the glass, which can be removed in a second step with glass cleaner.

In addition to removing adhesive, it is suitable for varnish, tar, oil stains and similar dirt as well as for cleaning brushes, tools and machine parts. Excellent for peeling off and removing self-adhesive labels.

Application

Spray from the spray bottle onto the surface to be cleaned, leave to work for 3-5 minutes and scrape off the adhesive residue with a glass scraper.

Contents: 500 ml

Store well closed, childproof and cool.

Available downloads

How to mount this film on the window...

Close menu

Montagevideo starten — Installation video for window films. Click on the picture to start.

Assembly instructions for Accessories

You will need the following items

Plastic bottle with hand sprayer, adhesive tape, paper towels (not included)
Transfer concentrate (not included)
Glass cleaner (not included) or commercially available glass cleaner
Installation squeegee and glass scraper blade (included free of charge in the delivery).

Installation tips

Two people should carry out the installation!
Do not install any film at temperatures on the installation side below +6° C.

Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
Thoroughly clean the glass with commercial or our glass cleaner!
Remove all sticky particles (e.g. paint or fly dirt) preferably with the glass scraper blade. No dirt residues should remain on the glass!
The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
Now hold the in place while the 2nd person
Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
Now let the dry for three days without touching it.
Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

FAQ`s about the installation

Films that are no larger than 1m² can be installed alone without any problems.
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.