Buy Adhesive Film Anthracite Grey Metallic for Exterior installations

Geometry Linear metre

Rounded corners

Width [cm]

Height [cm]

Cutting possible on request
Unfortunately, your desired size cannot be ordered via the online shop. However, we can still offer you the dimensions. Please ask our customer service at info@velken.shop.

from €1.79

Price per m² from: €67.70 Price per m²: €60.93 Price per m²: €67.70 incl. VAT plus shipping costs. Item no. 922023

Order accessories directly

Mounting squeegee with felt edge

€4.95

Surface & Glass Cleaner 500 ml

€6.95

Professional cutter knife

€5.95

Cutter knife

€2.95

Foil polishing cloth

€4.95

Delivery time approx. 5-7 Days

CNC cutting accurate to the millimetre

Properties of this film

Application	Glass, smooth surfaces, Stone, Plastic, Wood
Colour	grey
Liability	self-adhesive
Mounting side	Indoor assembly, Outdoor installation
Temperature resistant	-30°C to +80°C
Material thickness	approx. 180 µm
Durability	8 years (outdoor installation)
Grain	grained

Questionst?
Start WhatsApp chat

[OS_SUBTMPL:article/description_outdoor_foil.html]

Close menu

Self-adhesive weatherproof film for outdoor use

Outdoor film — Application example: Garage door wrapped in outdoor foil.

This high-performance film is specially designed for the requirements of renovating and designing untreated, painted and anodised outdoor surfaces. With its strong adhesion to smooth surfaces such as plastic, aluminium, metal and HPL, the multi-layer film is an ideal alternative to painting.

Advantages of this self-adhesive film

Durable: Permanently weatherproof & UV resistant
Economical: Save up to 50% compared to a conventional renovation
Easy to process: Easy to attach in one operation
Easy to clean: Thanks to the dirt-repellent PVDF surface
Durable: 8-year warranty against delamination, cracks, yellowing and other appearance changes
Sustainable: Does not emit any solvents
Odourless: No odor nuisance for processors and other environment
plottable and flame retardant

Areas of application

With the weather-resistant outdoor film, you can refresh plastic or metal surfaces such as garden tables, garage doors, sheet metal or facade elements quickly, inexpensively and permanently. The film covers the surface like a second skin and lets it shine again.

Please note that this film is not suitable for glass! Bubbles may form under the film after processing, probably due to heat from sunlight.

The special strength of the film allows it to be attached without any problems, even in windy conditions.

Another advantage: the silky-matt embossed, structured surface levels out slight unevenness. Unlike paint coatings, foils have a uniform thickness. At the same time, weatherproof adhesive film for outdoors is flexible enough to be attached around corners and edges.

Weather-resistant construction of the outdoor film

Certified Security

The film is weather-resistant for at least ten years when installed vertically.
The outer film meets the requirements of fire class EN 13501-1 flame retardant according to SBI test in class C-1, d0

Assembly & Removal

The air channel technology of the product prevents the formation of air bubbles. Also, small positioning errors can be easily corrected as the film can be repositioned before the adhesive has set.

Although the outer film was developed for permanent adhesion, the film can be removed from many surfaces after heating the surface and the film itself.

Included

ordered outdoor film
Assembly Instructions

The Assembly squeegee with felt edge, item no. 010150 you should order carefully. It makes assembly easier for you and leads to a better result.

Any cuts are not included in the scope of delivery.

Available downloads

Datenblatt Outdoorfolie

Technical data and information at a glance...

Close menu

Manufacturer's Warranty

The manufacturer grants a guarantee of 8 years for outdoor installation with vertical installation and 5 years with horizontal installation on this outdoor film. This guarantee applies to delamination, cracks, yellowing and other changes in appearance. The durability of the outdoor films for indoor installation is up to 15 years in Central Europe, depending on various factors.

The film has excellent abrasion resistance to acids (ethanol, salt), stains, dirt and mold, except xylene.

Technical overview
UV resistance	at least 10 years
Assembly page	Exterior & Interior
Strength	160-180 µm incl. adhesive
Slide weight	180-200 g per square meter
Glue	transparent high-performance acrylic adhesive
Stickiness	after 24 hours higher than 15N/25mm
max. roll width	130cm
roll length	50m
Temperature resistance	-30°C to +80°C
Reaction to fire	The film is flame retardant (B1) made of non-combustible material. Classification: C; d 0, s1 according to EN 13501-1
Ideal installation temperature	+10°C to +30°C for the film, substrate temperature +10°C to +40°C. Avoid intense sunlight during processing, "shade" if necessary.
Assembly instructions	Dry application with a suitable squeegee. Mold bonding possible using a heat gun.
REACH compliant	This outdoor film is an "article" and therefore does not fall under REACH. The raw materials that make up this film are REACH compliant.
Diffusion behavior	This adhesive film is vapor permeable with an SD value of 3.88 m. (Explanation: SD=1 means open, SD=100 means not open)

How to mount this film on the window...

Close menu

Montagevideo starten — Installation video for window films. Click on the picture to start.

Assembly instructions for Furniture films (self-adhesive)

You will need the following items

Plastic bottle with hand sprayer, adhesive tape, paper towels (not included)
Transfer concentrate (not included)
Glass cleaner (not included) or commercially available glass cleaner
Installation squeegee and glass scraper blade (included free of charge in the delivery).

Installation tips

Two people should carry out the installation!
Do not install any film at temperatures on the installation side below +6° C.

Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
Thoroughly clean the glass with commercial or our glass cleaner!
Remove all sticky particles (e.g. paint or fly dirt) preferably with the glass scraper blade. No dirt residues should remain on the glass!
The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
Now hold the in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
Now let the dry for three days without touching it.
Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

FAQ`s about the installation

Films that are no larger than 1m² can be installed alone without any problems.
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.

Order a product sample...

Close menu

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.